Save up to 30% on select Foscam IP Cameras


IP Camera Tool

Users can ask and answer questions regarding Foscam IP Cameras

Moderators: mycam, FOSCAM

IP Camera Tool

Postby Bert » Thu Mar 01, 2012 4:18 pm

Hi,

I just pruchased the F18910W and cannot get past Step 3 Login the Camera.

When I click on the IP Camera Toll icon as instructed there is no "annonamous IP...." just a blank page.

I have disabled my windows firewall and Semantic Auto-Portecrt features but the camera does not seem to be connecting.

Any ideas?

Thanks
Bert
 
Posts: 2
Joined: Thu Mar 01, 2012 4:10 pm

Re: IP Camera Tool

Postby mycam » Thu Mar 01, 2012 10:33 pm

How did you connect your camera?Did you connect it to the router and so as your pc?
Did the camera rotate automatically when it is powered on?
What is the status of the lights at RJ-45?
Did the green light come on and the orange light blink?
mycam
Admin
 
Posts: 353
Joined: Thu Nov 03, 2011 10:39 pm

Re: IP Camera Tool

Postby Bert » Fri Mar 02, 2012 9:23 am

HI,

Thank you for responding.


The camera was connected to DC Power and to one of the router ports using the cable supplied with the camera.

The camera powered up and rotated

The red light is on and steady
The orange and green lights at the cable port are on. The orange light blinked and now both are steady
The green light (just above the red light) is blinking
Bert
 
Posts: 2
Joined: Thu Mar 01, 2012 4:10 pm

Re: IP Camera Tool

Postby mycam » Mon Mar 05, 2012 3:53 am

Did you enable DHCP in your router?Pls enable.
Did you enable mac address filter in your router?pls disable.
Pls also disable the firewall in your router.
If all is ok,then can you find the camera's ip in the device list of your router?
mycam
Admin
 
Posts: 353
Joined: Thu Nov 03, 2011 10:39 pm


Return to Technical Support

Who is online

Users browsing this forum: No registered users and 6 guests