Important Message from Foscam Digital Technologies Regarding US Sales & Service

Foscam.US (aka Foscam Digital Technologies and now Amcrest Technologies) is an independent United States based distributor of "Foscam" branded products. We have been offering telephone support, US local warranty and building the Foscam brand in the US for the past 7 years. Based on our experiences with Foscam and feedback from end users we have launched our own new and improved line of wireless IP cameras and security systems under the Amcrest brand. Working in partnership with the second largest security camera manufacturer in the world, Amcrest was founded with a deep commitment to end-user privacy and security, highly reliable software and hardware as well a seamless and intuitive user experience. For more information, please visit www.Amcrest.com

If you are having trouble with your Foscam cameras, we sincerely apologize for this inconvenience and would love to help. For technical support, response to inquiries and for obtaining replacements for any Foscam IP Cameras or NVR products, please reach out to tech@foscam.com or call 1-844-344-1113.

If you are interested in exchanging your Foscam camera for an Amcrest camera, we can offer you a massive loyalty discount, even if you are out of warranty. Please send an email to support@amcrest.com, sales@amcrest.com or call 1-888-212-7538

If you are subscribed to Foscam Cloud (www.foscamcloud.com), please contact cloud@foscam.us for support.

If you currently use the manufacturer's cloud service (www.myfoscam.com or linked in any way to www.foscam.com), you will need to contact them directly for support, at www.myfoscam.com.


How to reset foscam IP config? Not loading when click on IP

Users can ask and answer questions regarding Foscam IP Cameras

Moderators: mycam, FOSCAM

How to reset foscam IP config? Not loading when click on IP

Postby laceylyn77 » Sat Jan 13, 2018 10:58 pm

I'm trying to setup my Foscam f18918w. I messed up when changing the IP address and port, and now it won't load. I was able to pull it up on the IP camera search tool, I then right-clicked and clicked on network configuration. I put in 10.0.0.117, 255.255.255.0, 10.0.0.1 and 10.0.0.1. The port I used is 80 (originally I had it set to 8092).

It seems to update well and shows on my camera search tool, but when I double click on it and the page says it can't be found. I changed the IP address around a little bit and it's still not working. What am I missing?

I've also held that reset button down multiple times for 5, 10 or 30 seconds each...
laceylyn77
 
Posts: 1
Joined: Thu Jan 08, 2015 10:05 pm

Return to Technical Support

Who is online

Users browsing this forum: No registered users and 12 guests